Red Eye® 2G Water-Cut Meter Ease of Use

Simplified Installation and Operation

The insertion style design reduces installation costs, particularly in large line sizes. The electronics are mounted directly on the measurement probe, limiting field wiring requirements to power and output signal cables. For NOC applications, the Red Eye 2G unit can accommodate either a 4 to 20 mA or a pulse input from a flowmeter. The flow rate is available as a Modbus™ readable parameter. The NOC unit requires a two-wire RS-485 connection to the meter for both water-cut and flow-rate information.

Simplified Calibration

All that is needed is a small, 50 ml, sample of dry oil at atmospheric conditions. The operator puts dry oil from the well to be tested in the sensor slot and pushes one button to calibrate. That’s it!

Configuration

The meter includes RedLine™ configuration software designed for pocket PCs. The software allows the user to configure communications, perform one button fluid calibrations and check system diagnostics. The connection can be done through either of the meter’s communication ports.